The mixing device is compared
with planetary concrete mixer.
The mixing blade adopts the parallelogram design structure. When the agitation wears to a certain extent, it can be rotated 180 degrees and continues to be reused. The mixer reduces the cost of the customer’s parts;
The mixing arm adopts a clamp-type structure design to maximize the utilization rate of the blades.
streamlined design of the mixing arm, reducing the probability of the material reporting arm, and designing a wear-resistant sheath with a transfer to extend the service life of the mixing arm.
[Double-shaft mixer]
The mixing device is divided into two types: blade type and ribbon type. Due to its own structural defects and low utilization rate of the blade, the mixing arm needs to be replaced after a period of use.
It is subject to the [double-shaft mixer] structure. The limitations increase the probability of the material holding the axle and the arm, thus increasing the cost of customer maintenance and replacement of parts.
Mixing effect comparison [Vertical axis planetary concrete mixer] can meet the mixing requirements of precast concrete, high mixing efficiency, good mixing quality and meet the requirements of product homogeneity.
Contrast [Double-shaft mixer] Since the prefabricated component is directly arranged under the mixing station, there is no secondary mixing in the transportation of commercial concrete tanker, so the homogenization standard of one stirring is required to be higher. Only by improving the homogeneity of the stirring, the scrap rate of the finished product can be reduced, and the high quality of the finished product can be achieved. Therefore, the superior performance of the vertical axis planetary concrete mixer is more suitable for precast concrete than the [double horizontal shaft mixer].
Stir. [Double-shaft mixer] is suitable for high-volume commercial concrete production and some
Post time: Jul-20-2018